<?xml version="1.0" encoding="UTF-8"?>
<rss xmlns:taxo="http://purl.org/rss/1.0/modules/taxonomy/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:dc="http://purl.org/dc/elements/1.1/" version="2.0">
  <channel>
    <title>DSpace collection: 專書</title>
    <link>https://irlib.pccu.edu.tw/handle/987654321/164</link>
    <description />
    <textInput>
      <title>The collection's search engine</title>
      <description>Search the Channel</description>
      <name>s</name>
      <link>https://irlib.pccu.edu.tw//simple-search</link>
    </textInput>
    <item>
      <title>中國文化大學紡織工程學系畢業論文專集</title>
      <link>https://irlib.pccu.edu.tw/handle/987654321/54996</link>
      <description>title: 中國文化大學紡織工程學系畢業論文專集</description>
      <pubDate>Mon, 18 May 2026 03:30:48 GMT</pubDate>
    </item>
    <item>
      <title>染色前處理不同精練劑對彈性聚酯針織布均染性之研究</title>
      <link>https://irlib.pccu.edu.tw/handle/987654321/53955</link>
      <description>title: 染色前處理不同精練劑對彈性聚酯針織布均染性之研究 abstract: 在處理彈性針織物的過程中，精練是染色過程中的重要步驟，其目的在於去除經編經紗與彈性絲中的紡絲油劑與髒污，提升布料的吸水性能，從而解決染色不均及顏色不準確的問題。&#xD;
本研究探討了不同精練劑濃度對兩種敏感色，翠藍色與灰色染色效果的影響，以尋求最佳精練劑及其濃度。&#xD;
研究結果顯示，圓編布與經編布在低起泡性精練劑濃度為0.5 g/L至1.0 g/L的條件下，吸水性能最佳，且處理90秒後水分擴散面積有所提升。染色性質方面，圓編布在0.5 g/L精練劑下，翠藍色的明亮度最佳（-0.19）；在1.2 g/L濃度下，綠色色光最強（明度為-1.67）；0.5 g/L濃度時，藍色色光最佳（明亮度為1.15）。灰色染色在0.5 g/L與1.0 g/L濃度下顏色差異不明顯。 對於經編布，使用0.5 g/L複合精練劑時，翠藍色的明亮度達到最佳（-0.69）；在1.0 g/L濃度下，表現為綠色明度0.55；而在0.5 g/L濃度時明度表現最佳（明亮度為0.72）。灰色染色在0.5 g/L與1.0 g/L濃度下的顏色差異不顯著。 綜合分析表明，染色灰色時，0.5 g/L及1.0 g/L濃度效果相近；然而，翠藍色對處理條件更加敏感，需依據△E值進行評估。整體而言，最佳精練劑濃度為0.5 g/L或1.0 g/L。&#xD;
&#xD;
In the processing of elastic knitted fabrics, scouring is a crucial step in the dyeing process. Its primary purpose is to remove spinning oils and impurities from warp-knitted yarns and elastic threads, thereby improving the fabric's water absorption and addressing issues of uneven dyeing and inaccurate coloration.&#xD;
This study investigates the effects of different scouring agent concentrations on the dyeing performance of two sensitive colors, turquoise blue and gray, to identify the optimal scouring agent and its concentration. The results show that circular-knitted and warp-knitted fabrics exhibit optimal water absorption when treated with low-foaming scouring agents at concentrations of 0.5 g/L to 1.0 g/L. Additionally, the water diffusion area improved after 90 seconds of treatment. In terms of dyeing properties, circular-knitted fabrics achieved the best brightness for turquoise blue at 0.5 g/L (-0.19), the strongest green hue at 1.2 g/L (brightness of -1.67), and the best blue hue at 0.5 g/L (brightness of 1.15). For gray dyeing, there was no significant difference in color between the concentrations of 0.5 g/L and 1.0 g/L. For warp-knitted fabrics, the optimal brightness for turquoise blue was achieved at 0.5 g/L using a composite scouring agent (-0.69). At 1.0 g/L, the green hue was strongest, with a brightness of 0.55, while at 0.5 g/L, the blue hue achieved the best brightness (0.72). Similarly, gray dyeing showed no significant color differences between 0.5 g/L and 1.0 g/L concentrations. In summary, gray dyeing performance was comparable between 0.5 g/L and 1.0 g/L concentrations. However, turquoise blue was more sensitive to treatment conditions, requiring △E values for evaluation. Overall, the optimal scouring agent concentration for both colors was determined to be 0.5 g/L or 1.0 g/L.
&lt;br&gt;</description>
      <pubDate>Fri, 14 Mar 2025 05:31:07 GMT</pubDate>
    </item>
    <item>
      <title>前定型的張力對彈性聚酯針織布拉伸回復之研究</title>
      <link>https://irlib.pccu.edu.tw/handle/987654321/53952</link>
      <description>title: 前定型的張力對彈性聚酯針織布拉伸回復之研究 abstract: 紡織品在染整、洗滌或穿著過程中會發生尺寸變化，影響外觀、手感和品質。良好的尺寸穩定性可防止變形、收縮或延展，對提升品質至關重要，若前定型張力過大，會過度拉伸織物，降低抗熱變形能力，優化流程可減少重修所帶來的時間、成本和能源浪費，降低不必要損失。&#xD;
當前定型張力過高時，織物經向容易過度拉伸，進而破壞其組織結構和紗線的完整性，使其失去應有的抗熱變形能力，當前定型張力為2.0 kg時，經編彈性網布的熱燙縮率表現最佳；而緯編彈性單面前定型張力在2.0 kg與2.5 kg時，呈現最佳，兩者之間差異不大。在抗水洗變形能力方面，經編彈性網布與緯編彈性單面布的水洗縮率均為前定型張力為2.0 kg的結果最佳；而3.0kg則顯示出明顯的過度拉伸現象。經編彈性網布的經向拉伸率最佳的前定型張力經向為2.0 kg與緯向為前定型張力3.0 kg；緯編彈性單面的經向拉伸率最佳的前定型張力經向為2.0 kg與緯向為前定型張力3.0 kg；在抗變形能力方面，經編彈性網布經向最適合的前定型張力為2.5 kg，緯向最適合的前定型張力為2.5 kg，緯編彈性單面經向最適合的前定型張力為2.0 kg，緯向最適合的前定型張力為2.5 kg。&#xD;
綜合結果得知，本研究經緯編彈性網布拉伸率的經向最好的為2.0 kg，而緯向最好的為3.0 kg，為了能讓經、緯向測試結果都能通過客戶核可與最有效節省能源與工程，在生產條件設定結果將選用中間值2.5 kg，因為此設定值可以讓織物的物理性質達到均衡的情況，因此經編彈性網布與緯編彈性單面布最適合生產的條件皆為前定型張力2.5 kg。&#xD;
&#xD;
Textiles undergo dimensional changes during processes such as dyeing, finishing, washing, or wearing, which affect their appearance, feel, and overall quality. Good dimensional stability can prevent deformation, shrinkage, or stretching, and is crucial for enhancing quality. Excessive preset tension during pre-shaping can overstretch the fabric, reducing its heat deformation resistance. Optimizing processes can reduce time, costs, and energy waste caused by reworking, ultimately minimizing unnecessary losses.&#xD;
When preset tension is too high, fabrics tend to be overstretched in the warp direction, which damages their structure and yarn integrity, causing a loss of heat deformation resistance. The best heat shrinkage performance for warp-knitted elastic mesh fabric is achieved with a preset tension of 2.0 kg; for weft-knitted elastic single-sided fabrics, there is little difference between preset tensions of 2.0 kg and 2.5 kg, both performing well. In terms of washing deformation resistance, both warp-knitted elastic mesh fabric and weft-knitted elastic single-sided fabric show optimal washing shrinkage at a preset tension of 2.0 kg, while a preset tension of 3.0 kg shows significant overstretching.&#xD;
For warp-knitted elastic mesh fabric, the best warp stretch is achieved with a preset tension of 2.0 kg, and the best weft stretch is achieved with a preset tension of 3.0 kg. For weft-knitted elastic single-sided fabric, the best warp stretch is also achieved with a preset tension of 2.0 kg, and the best weft stretch with a preset tension of 3.0 kg. In terms of deformation resistance, the most suitable preset tension for warp direction in warp-knitted elastic mesh fabric is 2.5 kg, and for weft direction, it is also 2.5 kg. The most suitable preset tension for warp direction in weft-knitted elastic single-sided fabric is 2.0 kg, and for weft direction, it is 2.5 kg.&#xD;
In summary, this study shows that the best warp stretch rate is achieved with a preset tension of 2.0 kg, while the best weft stretch rate is achieved with a preset tension of 3.0 kg. To ensure both warp and weft direction test results meet customer approval and to effectively save energy and resources, production conditions should be set to the intermediate value of 2.5 kg to balance the fabric’s physical properties. Therefore, the optimal preset tension for both warp-knitted elastic mesh and weft-knitted elastic single-sided fabrics is 2.5 kg.
&lt;br&gt;</description>
      <pubDate>Fri, 14 Mar 2025 05:14:11 GMT</pubDate>
    </item>
    <item>
      <title>染整技術原理與實務</title>
      <link>https://irlib.pccu.edu.tw/handle/987654321/51009</link>
      <description>title: 染整技術原理與實務</description>
      <pubDate>Thu, 16 Feb 2023 04:06:02 GMT</pubDate>
    </item>
  </channel>
</rss>

